Juniper PTX10008 - Page 286

Figure 154: Installing a JNP10K-PWR-AC2 in a PTX10016
g100606
11. Attach each power cable to a dedicated power (A and B). The JNP10K-PWR-AC2 only requires that
each power supply be connected to a separate source. See Figure 155 on page 290 for some possible
cabling combinations for PTX10008 and Figure 156 on page 291 for PTX10016.
Figure 155: Proper Load Balancing for JNP10K-PWR-AC2 Power Cables on PTX10008
g100687
OR
290