Figure 192: Removing a SIB Cover Plate on a PTX10008
5. Lift the SIB by the handle with one hand and support the lower edge with the other hand.
6. Holding the SIB vertically, slide the SIB into the open slot until the ejector handles engage and start to
close.
7. Grasp the two ejector handles and fold them inward until they latch to seat the SIB (see
Figure 193 on page 329 for the PTX10008 and Figure 194 on page 330 for the PTX10016).
328
To Next Page
Loading...
