4. On each side, hold the bottom of the chassis and carefully lift it up from the base and rear brackets on
the four-post rack.
5. Carefully lift it out of rack. If you have a pallet jack, move the router onto the pallet jack. See
Figure 219 on page 362.
Figure 219: Lifting the PTX10008 Without Using a Mechanical Lift
6. Carefully move the chassis to its new location.
After moving the router to its new location, reinstall the components in the chassis or store the
components in electrostatic bags.
SEE ALSO
Removing a PTX10008 From a 4-Post Rack Using a Mechanical Lift | 358
Connecting Earth Ground to a PTX10000 | 232
Connecting AC Power to a PTX10000 | 235
Connecting DC Power to a PTX10000 | 235
362
To Next Page
Loading...
