Juniper SRX380 User Manual

for not meeting the hardware replacement service-level agreement for products that do not have registered serial numbers
or accurate installation base data.
Register your product at https://tools.juniper.net/svcreg/SRegSerialNum.jsp.
Update your installation base at https://www.juniper.net/customers/csc/management/updateinstallbase.jsp.
SRX380 Front Panel and Rear Panel
Figure 1: SRX380 Front Panel Components
g100930
ALARM
PWR
A
HA
mPIM1
mPIM2
mPIM3
mPIM4
mPIM
1
2
T TS
3 4
0 / 8 0/9 0 / 10 0/ 11 0 / 12 0 / 13 0 / 14 0/ 15 0 / 16 0 / 17 0/ 18 0 / 19
1
2
4
6791011 8
21
4
5
3
7—1— 1-Gigabit Ethernet portsLEDs
8—2— Management portReset Config button
9—3— USB portMini-USB console port
10—4— RJ-45 console portMini-PIM slots
11—5— Power buttonESD outlet
6—1-Gigabit Ethernet or 10-Gigabit Ethernet SFP/SFP+ ports
Figure 2: SRX380 Rear Panel Components
g100933
1
3
2
4
3—1— Power supply inputGrounding point
4—2— SSD slotFans
2

Juniper SRX380 Specifications

General

Firewall Throughput	20 Gbps
IPSec VPN Throughput	4 Gbps
Memory	8 GB
MTBF	200, 000 hours
Form Factor	1U
Concurrent Sessions	1, 000, 000
Interfaces	16 x 1GbE, 4 x 10GbE
Power Supply	Dual redundant AC or DC
Operating Temperature	32° to 104° F (0° to 40° C)
Storage Temperature	-4° to 158° F (-20° to 70° C)
Humidity	5% to 90% non-condensing