Juniper SRX380 - Factory-Default Settings

SRX380 Services Gateway Physical Specifications
Table 1 lists the physical specifications for the services gateway.
Table 1: Physical Specifications for the SRX380 Services Gateway
ValuePhysical Specification of Chassis
With handles—20.47 in. (52 cm)
Without handles—18.7 in. (47.5 cm)
Depth
17.36 in. (44.09 cm)Width
1.72 in. (4.37 cm)Height
15 lb (6.80 kg)Weight (with single power supply unit)
Factory-Default Settings
The SRX380 device is shipped with the with the factory-default settings listed in Table 2, Table 3, Table 4, and Table 5.
Table 2: Security Policies
Policy ActionDestination ZoneSource Zone
permittrusttrust
permituntrusttrust
Table 3: NAT Rules
Policy ActionDestination ZoneSource Zone
Source NAT to untrust zone interfaceuntrusttrust
Table 4: Ethernet Interfaces
IP AddressDHCP StateSecurity ZoneInterfacePort Label
UnassignedClientuntrustge-0/0/0 and xe-0/0/190/0 and 0/19
3