Juniper WLC Series User Manual

CHAPTER 4
Site Preparation
•
Site Preparation Checklist for WLC100 Wireless LAN Controllers on page 17
•
Environmental Requirements and Specifications for WLC100 Wireless LAN
Controllers on page 18
•
General Safety Guidelines for WLC100 Wireless LAN Controllers on page 19
Site Preparation Checklist for WLC100 Wireless LAN Controllers
The checklist in Table 8 on page 17 summarizes the tasks you need to perform for
preparing a site for mounting WLC100 controllers.
Table 8: Site Preparation Checklist
DatePerformed byFor More InformationItem or Task
Environment
“Environmental Requirements and Specifications for
WLC100 Wireless LAN Controllers” on page 18
Verify that environmental
factors such as temperature
and humidity do not exceed
access point tolerances.
Power
WLC100 controllers require an installed Category 5
cable.
Measure the distance between
the power source and the site
where you plan to mount the
controller.
Locate optimal sites for the
desired type of mounting.
Calculate the power
consumption and
requirements.
Hardware Configuration
Planning Guidelines for Using RingMaster to Plan a
Mobility System
Choose the number of access
points and WLC Series
controllers needed for your
planned Mobility System.
17Copyright © 2013, Juniper Networks, Inc.

Juniper WLC Series Specifications

General

Brand	Juniper
Model	WLC Series
Category	Controller
Language	English