EasyManuals Logo

Juniper WLC Series User Manual

Juniper WLC Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
NOTE: Do not place any object on top of the controller chassis.
3. (Optional) Attach the optional standard cable lock to the slot for the security cable
latch on the rear panel of the controller:
a. Secure the cable to a desk or a rack and set the lock to the unlocked position.
b. Insert the lock into a security slot on the rear panel of the controller chassis and
set the lock to the locked position.
Related
Documentation
Mounting WLC100 Wireless LAN Controllers on a Rack or Cabinet on page 30
Mounting WLC100 Wireless LAN Controllers on a Wall on page 33
Mounting WLC100 Wireless LAN Controllers on a Rack or Cabinet
You can mount WLC100 controllers on two posts of a two-post or a four-post 19-in. rack
or cabinet by using the rack-mount tray and screws provided with the WLC100 rack-mount
kit. The remainder of this topic uses rack to mean rack or cabinet.
NOTE: The rack-mount kit is not shipped with the device and must be ordered
separately.
Before mounting the controller on two posts of a rack:
Verify that the site meets the requirements described in “Site Preparation Checklist
for WLC100 Wireless LAN Controllers” on page 17.
Place the rack in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
Read “General Safety Guidelines for WLC100 Wireless LAN Controllers” on page 19
and “Rack Requirements for WLC100 Wireless LAN Controllers” on page 21.
Ensure that you have the following parts and tools available:
Phillips (+) screwdriver, number 2
1 rack-mount tray (provided in the separately orderable rack-mount kit)
2 system lock brackets (provided in the separately orderable rack-mount kit)
1 power adapter lock bracket (provided in the separately orderable rack-mount kit)
4 rack-mount screws of 12-24 thread type (provided in the separately orderable
rack-mount kit)
NOTE: Do not block the vents on the controllers. Doing this can lead to
overheating of the controller chassis.
Copyright © 2013, Juniper Networks, Inc.30
Complete Hardware Guide for WLC100 Wireless LAN Controller

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper WLC Series and is the answer not in the manual?

Juniper WLC Series Specifications

General IconGeneral
BrandJuniper
ModelWLC Series
CategoryController
LanguageEnglish

Related product manuals