17
2 Preparation
T Place a cup under the coffee spout and the fine foam frother.
E Ensure that the filling height of the milk is no higher than
the milk pipe connection on the fine foam frother.
T Press the Rotary Switch.
CAPPUCC.
HEATING
As soon as the machine has heated up, OPEN SWITCH
appears, the light segment on the switch lights up.
T Turn the switch to them position.
The milk foam is prepared. Preparation stops automatically
when the preset amount of milk foam is reached.
CLOSE SWITCH
T Turn the switch to the °position.
Coffee preparation starts. The preset amount of water for
espresso flows into the cup.
Preparation stops automatically.
CAPPUCC. appears on
the display.
To ensure that the fine foam frother always works properly,
you must clean it daily when you have been preparing milk (see
Chapter 5 ‘Maintenance – Cleaning the fine foam frother’).
Precondition:
CAPPUCC. is displayed (example). Milk is
connected to the fine foam frother.
T Place a cup under the fine foam frother.
E Ensure that the filling height of the milk is no higher than the
milk pipe connection on the fine foam frother.
T Touch the Milk foam symboln.
HEATING/ MILK
As soon as the machine has heated up, MILK/ READY,
the light segment on the switch lights up.
T Turn the switch to them position.
The milk foam is prepared.
Preparation stops automatically when the preset amount of
milk foam is reached.
Milk foam
To Next Page
Loading...
Need help?
General
Weight and Dimensions
