EasyManuals Logo

Jura D6 User Manual

Jura D6
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
30
5 Maintenance
TTurn the switch to the °position.
WATER
TRinse the receptacle thoroughly, fill it with 8.5 oz (250ml) of
fresh water and immerse the milk pipe in the water.
TEmpty the other receptacle and place it under the fine foam
frother once more.
TPress the Rotary Switch.
OPEN SWITCH
TTurn the switch to them position.
The fine foam frother and the milk pipe are rinsed with fresh
water.
CLOSE SWITCH
TTurn the switch to the °position.
CAPPUCC. (example)
To make sure the fine foam frother works properly, and in the
interests of hygiene, it must be dismantled and rinsed daily if you
have been preparing milk. Your D6 will not prompt you to
dismantle and rinse the frother.
TRemove the milk pipe and rinse it thoroughly under running
water.
TCarefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
TDismantle the fine foam frother into its individual parts.
TRinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 8.5 oz (250ml) cold water and 1 capful of JURA
milk system cleaner. Then rinse the parts thoroughly.
TRe-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation.
TFirmly attach the fine foam frother to the Connector
System
©
.
Dismantling and rinsing
the fine foam frother

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jura D6 and is the answer not in the manual?

Jura D6 Specifications

General IconGeneral
Color namePlatina
Control typeButtons, Rotary
Product colorBlack, Platinum
Drip/spout adjustmentVertical
Water level indicatorYes
Ristretto makingNo
Product typeEspresso machine
CertificationTUV
Capacity in cups16 cups
Coffee input typeCoffee beans, Ground coffee
Coffee maker typeFully-auto
Appliance placementCountertop
Water tank capacity1.9 L
Coffee beans capacity200 g
Reservoir for brewed coffeeCup
Number of temperature settings2
Cable length1.1 m
Pump pressure15 bar
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0 W
Weight and Dimensions IconWeight and Dimensions
Depth415 mm
Width280 mm
Height345 mm
Weight8700 g

Related product manuals