Jura D6 User Manual

13
1 Preparing and using for the first time
E The water may be slightly discolored. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically.
CLOSE SWITCH
T Turn the switch to the °position.
SYSTEM FILLING, the system fills up with water.
EMPTY TRAY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
T Place a receptacle under the coffee spout.
HEATING
RINSING, the system is rinsed. Water flows out of the
coffee spout. The rinse stops automatically.
CAPPUCC.
appears on the display. Your D6 is ready for use.
Your D6 creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is
a milk temperature of 39–46 °F (4–8 °C). We would therefore
recommend using a milk cooler or a milk container.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.
Connecting milk

Jura D6 Specifications

General

Color name	Platina
Control type	Buttons, Rotary
Product color	Black, Platinum
Drip/spout adjustment	Vertical
Water level indicator	Yes
Ristretto making	No
Product type	Espresso machine
Certification	TUV
Capacity in cups	16 cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.9 L
Coffee beans capacity	200 g
Reservoir for brewed coffee	Cup
Number of temperature settings	2
Cable length	1.1 m
Pump pressure	15 bar
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0 W

Weight and Dimensions

Depth	415 mm
Width	280 mm
Height	345 mm
Weight	8700 g