Jura D6 - Maintenance; Maintenance Programs and Frother Rinsing

28
5 Maintenance
5 Maintenance
Use of maintenance products that are harmful to health and
discharge of liquids during maintenance program. Harmful if
swallowed. Irritating to eyes and skin.
T Keep children AWAY.
T Keep children away from the machine while it is performing a
maintenance program.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T When using do not eat or drink.
T Keep maintenance products away from food, drink and
animal food.
T Keep container tightly closed and dry. Keep in a cool place.
Your D6 has the following integrated maintenance programs:
U
Cleaning the fine foam frother (M-CLEAN)
U
Cleaning the machine (CLEAN)
U
Descaling the machine (DESCALE)
E Proceed with the maintenance programs when prompted to
do so.
E You can start the maintenance programs at any time in
programming mode (program item
RINSE).
Ten minutes after milk preparation, the D6 prompts you to perform
milk system rinsing.
Precondition:
M-RINSE/ CAPPUCC. is displayed (example).
T Place a receptacle under the fine foam frother.
T Touch the Maintenance symbol c for approximately
2 seconds until
OPEN SWITCH appears.
T Turn the switch to them position.
The fine foam frother is rinsed.
CLOSE SWITCH
T Turn the switch to the °position.
CAPPUCC. (example)
J WARNING
Rinsing the fine foam
frother