Jura D6 - 6 Display Messages

36
6 Display messages
6 Display messages
Message Cause/Result Action
FILL TANK
The water tank is empty. You
cannot prepare any products.
T Fill the water tank (see Chapter 3
‘Daily operation – Filling the water
tank’).
EMPTY TRAY
The drip tray is full. No specialty
coffees can be prepared. You
can prepare hot water and milk
foam.
T Empty the coffee grounds
container and the drip tray (see
Chapter 3 ‘Daily operation – Daily
maintenance’).
TRAY MISSING
The drip tray is not inserted
correctly or is not inserted at
all. You cannot prepare any
products.
T Fit the drip tray.
FILL BEANS
The bean container is empty.
No specialty coffees can be
prepared. You can prepare hot
water and milk foam.
T Fill the bean container (see Chap-
ter 1 ‘Preparing and using for the first
time – Filling the bean container’).
T Press the Rotary Switch to confirm
that the bean container has been
filled.
PRESS RINSE
The D6 is prompting you to
continue a previously started
maintenance program.
T Touch the Maintenance symbol c
to continue the program.
FILTER/
CAPPUCC.
(example)
The filter cartridge no longer
works.
T Replace the CLEARYL Smart filter
cartridge (see Chapter 5
‘Maintenance – Inserting/changing
the filter’).
CLEAN/
CAPPUCC.
(example)
The D6 is prompting you to
clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the
machine’).
DESCALE/
CAPPUCC.
(example)
The D6 is prompting you to
descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the
machine ’).
TOO HOT
The system is too hot to start a
maintenance program.
T Wait for several minutes until
the system has cooled or prepare a
specialty coffee or hot water.