Jura Z8 - Product Settings

26
4 Permanent settings in programming mode
Touch a product for about 2 seconds to view the list of setting
options:
U
‘Product settings’: Specify individual settings such as coffee
strength, amount of water etc.
U
‘Product name’: Change the name of the product.
U
‘Delete’: Remove a product from the start screen.
U
‘Replace product’: Replace the products on the start screen
with your favourites.
U
‘Copy product’: Duplicate any product, for example to create
a variant with a new product name and individual settings.
U
‘Double product’ (not for products with milk or hot water):
Create a double product of the desired speciality.
The following settings can be set permanently for all speciality cof-
fees, milk and hot water:
Product Coffee
strength
Amount More settings
Ristretto,
Espresso
10 levels Coffee: 15ml–80ml Temperature (low, normal,
high), product name, delete/
replace/copy/double product
Coffee 10 levels Coffee: 25ml–240ml Temperature (low, normal,
high), product name, delete/
replace/copy/double product
Caffè Barista,
Lungo Barista
10 levels Coffee: 25ml–240ml
Bypass water:
0ml–240ml
Temperature (low, normal,
high), product name, delete/
replace/copy/double product
Two ristretti,
two espressi,
two coffees,
two caffè Barista,
two lungo Barista
– Coffee: the amount set
for the single product is
doubled.
Temperature (as for single
product), product name, delete
product
Cappuccino 10 levels Coffee: 25ml–240ml
Milk foam:
0sec.–120sec.
Milk foam temperature,
temperature (low, normal,
high), product name, delete/
replace/copy product
Product settings
Adjusting the product
settings