V32/37GCGI-UD1_V32/37GCJI-UD2 2006/8/3 下午 04:23
34
8. Troubleshooting
There is no picture or sound.
‧ Make sure Power cord and Antenna cable are properly connected.
‧ Make sure the MAIN POWER switch is set to ON.
‧ Verify that there is a valid source signal.
‧ Make sure the correct input mode is selected.
There is no picture from AV.
‧ Make sure the video sources are plugged into the correct
Video-In ports.
‧ Make sure the BRIGHTNESS is properly adjusted.
There is no sound.
‧ Check audio connections between equipment and LCD-TV.
‧ The Audio Out of equipment connects to Audio In of
LCD-TV.
‧ Make sure the volume is not set to minimum.
‧ Make sure the sound is not muted
There is no picture or sound, just noise.
‧ The source signal may be weak.
‧ Your provider may be experiencing difficulties.
‧ Check your input connections.
To Next Page
Loading...
Need help?
General
