V32/37GCGI-UD1_V32/37GCJI-UD2 2006/8/3 下午 04:23
35
Picture is not clear.
‧ The source signal may be weak.
‧ The provider may be experiencing difficulties.
‧ Check input connections.
Picture is light or improperly tinted.
‧ Check the Hue, Saturation and Color adjustments.
‧ Reset the TV to the factory default settings.
The picture is too dark.
‧ Select a different APC mode.
‧ Check the BRIGHTNESS adjustments.
‧ The fluorescent lamp may have reached the end of its life.
Contact an authorized service center.
Remote control does not work.
‧ Make sure the VCR, CBL, or AUX button for other devices
hadn’t be pressed. Press TV button again.
‧ Install new batteries
‧ Make sure the remote sensor window isn’t blocked.
The picture is not sharp.
‧ The signal source may be weak.
‧ The provider may be experiencing difficulties.
‧ Check input connections.
To Next Page
Loading...
Need help?
General
