V32/37GCGI-UD1_V32/37GCJI-UD2 2006/8/3 下午 04:23
4
Safety Precautions
1. Cleaning: Unplug the power cord from the AC outlet before cleaning the product. Use a damp
cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
2. Water and moisture: Do not use the product near water or areas of high moisture content such
as swimming pools, bathtubs or wet basements.
3. Ensure that no water droplets remain on the screen. Water can cause permanent discoloration.
4. Heat sources: Keep the product away from heat sources such as radiators, heaters, stoves and
other heat-generating products (including amplifiers).
5. For added protection during a lightning storm or for extended periods of non-use, unplug the
power cord from the wall outlet and disconnect the antenna (if used). This will prevent damage
to the product due to power line surges.
6. If an outside antenna is connected to the product, make sure the antenna is properly grounded
so as to provide some protection against voltage surges and build up static charges.
7. Keep the original packaging and use it to protect the LCD display during transport or storage.
8. After transportation your LCD display please wait until it has assumed the ambient
temperature between +41°F~+95°F before connecting and switching it on. Extremely high
variations in the temperature or humidity may result in condensation forming on the inside of
the LCD display which could cause an electrical short-circuit.
Example of antenna grounding
As per national electrical code
Antenna lead in wire
Antenna discharge
unit
Grounding conductors
Ground clamps
Power service
grounding
Electrode system
Ground clamp
Electric service
equipment
To Next Page
Loading...
Need help?
General
