10
Attaching the Stand
The stand installation varies depending on
model. Perform the installation according to the
instructions of your TV model.
Unpacking the TV
1 Remove TV accessories and protective foam.
2 Remove TV from the box and place it on a at
and clean surface with TV screen facing down.
3 Attach the stand to TV using the provided
hex-screw.
4 Fasten the screw with provided hex key
wrench.
EM32T (32”) & EM37T (37”)
Removing the Stand
When the TV needs to be transported, remove
the stand and pack the TV back in the carton.
To remove the stand, perform the assemble
steps in reverse order according to your TV
model.
To Next Page
Loading...
Need help?
General
