JVC Emerald EM37T User Manual

30
Partial Scan Channels
You can partially scan for network signal within a specied range of channels.
1 Press MENU.
2 Press
or to select “Partial Channel Scan”, then press or OK.
3 Press
or to select “Scan Mode”, then press or OK.
4 Press
or to select an option, then press OK.
t“Analog/Digital”: scan for both analog and digital channels
t“Analog”: scan for analog channels
t“Digital”: scan for digital channels
5 Press
or to select “From Channel”, then enter a starting channel range.
6 Press
or to select “To Channel”, then enter an ending channel range.
7 Press
or to select “Start Scan”, then press OK.
Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.
Add Channel
New channels may be added to your area periodically. Use the Add Channel function to add new
channels.
1 Press MENU.
2 Press
or to select “Channel”, then press or OK.
3 Press
or to select “Find Channel”, then press or OK.
4 Press
or to select “Enter Channel”, then enter a channel.
5 Press
to select “Add Channel”, then press OK.
Added channels are listed on the Channel List screen.
Delete Channel
To remove a channel from the Channel List screen.
1 Press MENU.
2 Press or to select “Channel”, then press or OK.
3 Press
or to select “Channel Management”, then press or OK.
4 Press
or , then press OK to mark the channels that you want to remove from the
Channel List.
5 Press RETURN to close the menu screen.
Sleep Timer
Sleep timer sets the TV to automatically turn o after a preset amount of time. See page 21.

JVC Emerald EM37T Specifications

General

Brand	JVC
Model	Emerald EM37T
Category	LED TV
Language	English