US[_iltg toiIh_Radi_}_:: _ ::::::
Toselecttheband(FlVlor AM)
FM _ AM q
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned ill, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
If the received FM station is hard to listen _>))
FM MODE/
MP3
The MONO indicator lights on the display.
Reception will improve though stereo
effect is lost--Monaural reception mode.
To restore the stereo effect, press the
button again (the MONO indicator goes
off).
To preset the stations _>>)
You call preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset.
2 Activate the preset number entry mode.
SET
"3 F"
]
• Finish tile following process while the indication on the
display is flashing.
3 Select a preset number for the station you store.
@@@
®®®
@®®
Examples:
To select preset number 5, press
5.
To select preset number 15, press
+ 10, then 5.
To select preset number 30, press
+10, +10, then 10.
• You call also use tile PRESET UP/PRESET DOWN
buttons.
4 Store the station.
SET
q r,-,c,,-r,
_ UP_ C mj
9
To Next Page
Loading...
Need help?
General
