For IVlP3playback
According to the MP3 playback mode, I-<t</<< /
I=,._/_1_t or number buttons work for the group
selection or file track selection.
Examples:
When the MP3 play back mode is "GROUP."
GR. (Group)indicator
-- ]
IDGR'_ i-_11_-I__t i
Total group number Total track number
You carl change the MP3 playback mode
by pressing FM MODE/MP3.
• Each time you press the button, the MP3
playback mode changes as follows:
TRACK-*I_GROUP
FMMODE/
MP3
TRACK: I-<_U_I<, D,,._/_I_t, arrd number
buttons work for tire track selection of
the MP3 discs.
GROUP: I-<_U_I<, I=,._/_1_t, arrd number
buttons work for the group selection
of the MP3 discs.
MP3 groups/tracks configuration
This System plays back MP3 tracks as follows.
Hierarchy ]
Level 1 , Level2 , Level3 , Level4 , Level5
F'_ Group with its play order
,_>,_) MP3 track with its play order
tromth PG,, ;::;
This System is equipped with a USB terminal on the front
panel of the main unit. You can connect your PC to this
terminal arrd enjoy sound reproduced through your PC.
When you connect your PC for the first time, follow the
procedure below.
• Remember you cannot send arty signal or data to your PC
from this System.
Howto installthe USBdrivers
The following procedure is described using tire English
version of Windows _' XP. If your PC is running on a
different version of operation system or language, the
screens shown on your PC's monitor will differ from file
ones used in the following procedure.
2
3
4
Turn on your PC and start running Windows_: 98,
Windows _'98SE, Windows _" Me, Windows :" 2000, or
Windows _:XP.
• If the PC has been turned on, quit all the applications
now running.
Select USB as the source.
Set the volume to minimum.
Connect the System to the PC using a USB cable (not
supplied).
_,_r_ (front panel) PC
USB cable _ _l
• Use "USB series A plug to B plug" cable when
connecting.
IMPORTANT
• Always set volume to "VOL-MIN" when connecting or
disconnecting the other equipment.
11
To Next Page
Loading...
Need help?
General
