Daily Operations--Playback(see pages 8 to 12)
Listening to the Radio:
• If you store a new station into an occupied preset number, the
previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If this
happens, preset the stations again.
Playing Back a Disc:
• When using an 8 cm (3-3/1_,inch) disc, place it on the inner
critic of the disc tray.
• This System cannot play "packet write" discs.
• For MP3 playback...
- MP3 discs are required a longer readout time than regular
CDs. (It depends on the complexity of the group/file
configuration.)
- Some MP3 files calmot be played back and will be skipped.
This result from their recording processes and conditions.
When making MP3 discs, use ISO 9660 Level 1 or Level 2
%r the disc format.
This System can play back MP3 files with the extension
code <.rap3> (regardless of the letter case--upper/lower).
- Some characters or symbols will not be shown correctly on
the display.
The lnaxilnum character number shown on the display is 32
(without the extension code) for files, and 30 for ID3 tag.
It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at bit rate of 128 kbps.
This System can recognize the total of 500 tracks and of 2(t(t
groups. Those exceeding the maximum number cannot be
recognized.
Playback order of MP3 tracks may be different from the one
you have intended while recording. If a %lder does not
include MP3 tracks, they are ignored.
When discs* in more than one tray are loaded on the disc
trays, they are played in sequence as follows:
Ex.: When CD 2 is selected:
CD 2 -> CD 3 -> CD 4 -> CD 5 -> CD 1 (then selects
CD 2, and stops)
* When no disc is loaded on the tray, that disc number is
skipped.
You can exchange discs while playing or selecting another
disc.
Daily Operations--Sound& OtherAdjustments
(see pages 13 and 14)
Adjusting the Volume:
• Be sure to turn down the voltlme before counectiug or putting
the headphones.
Adjusting the Sound:
• This function also affects the sound through the headphones.
Setting the Clock:
• "AM 12:00" will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Turning the Power Autonmtically:
• Auto Standby cannot be canceled by the %flowing operations.
- Changing the display brightness.
A([iusting the volume.
- Ac[iusting the sound.
AdvancedDiscOperations(see pages 15 to 17)
Programming the Playing Order--Program Play:
• If you try to program a 33rd track, "FULL" appears on the
display.
• While programming steps...
Your entry will be ignored if you have tried to program an item
number that does not exist on the disc (for example, selecting
track 14 on a disc that only has 12 tracks).
Timer Operations(see pages 18 and 19)
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the clock
first, then the timer again.
• If you set the Sleep Timer alter Daily Timer starts playing the
selected source, Daily Timer is canceled.
To removethe speakergrilles
\ Speaker
grille
Holes
Pro ections
2O
To Next Page
Loading...
Need help?
General
