JVC GR-DVF10U - Page 27

EN27
FOCUS
EXPOSURE AUTO
OFF
OFF
AUTO
AUTO
W. BALANCE
4
FADER
/ WIPE
P. AE
/ EFFECT
RETURN
FADER / WIPE
SEL.
FADER–BLACK
FADER–B.W
WIPE–SHUTTER
RANDOM
OFF
4
FADER–WHITE
P
R
?
W H
B K
B W
FADER–MOSAIC
MANUAL
PAUSE
WH
Fade/Wipe Effects
These effects let you make pro-style scene transitions. Use
these to spice up the transition from one scene to the next.
You can also vary transitions from scene to scene.
EFFECT SELECTION
1
ACCESS MANUAL MODE ITEM MENU
Set the Power Switch to “PRO.”, then press the Select
Dial.
2
ACCESS FADER/WIPE MENU
Rotate the Select Dial to move the highlight bar to
“FADER/WIPE”, then press it.
3
SELECT EFFECT
Rotate the Select Dial to move the highlight bar to the
desired function, then press it.
•The Fade/Wipe Menu disappears and the effect is
reserved. The indicator representing the selected
effect appears.
Fade-in
Recording Start/
Stop Button
Manual Mode Item
Menu
Fader/Wipe Menu
[Ex.:
W H
FADER – WHITE]
Select Dial
Display
Fade-out
FADE/WIPE SELECTION
( W H ,
B K
, ,
B W
, , , , , , and
R
?
)
A scene gradually appears on a black, white, or black-and-
white screen or mosaic pattern (Fade-in or Wipe-in); or
disappears, leaving a black, white, or black-and-white
screen or mosaic pattern (Fade-out or Wipe-out).
Fade or Wipe works when recording is started or when
you stop recording.
Before the following step, perform the above steps 1
through 3.
4
START OR END RECORDING
Press the Recording Start/Stop Button to activate
Fade-in/out or Wipe-in/out.
NOTE:
Z pg. 28.