EN49
TW
VIDEO ECHO5
PLAYBACK EFFECT
STROBE
CLASSIC FILM
MONOTONE
SEPIA
4
1
2
3
OFF
4
B
/
W
Playback Special Effects
These effects allow you to be creative with the playback
picture. You can use any one of the 4 effects.
1
START PLAYBACK
Press PLAY (
4
).
2
ACCESS PLAYBACK EFFECT SELECT
MENU
Point the remote control at the camcorder’s remote
sensor and press EFFECT. The PLAYBACK EFFECT
Select Menu appears.
3
SELECT PLAYBACK EFFECT
Move the highlight bar to the desired effect by
pressing EFFECT. The selected function is activated
and after 2 seconds the menu disappears.
NOTES:
●
To deactivate the selected effect, press EFFECT ON/OFF
on the remote control. Pressing it again re-activates the
selected effect.
●
Repeat from step 2 when you want to change the
selected effect.
●
When “MONOTONE” or “SEPIA” is activated, the
“MULTI 4” and “MULTI 9” Snapshot modes (
Z
pg. 23)
are not available.
The effects that can be used during playback are Classic
Film, Monotone, Sepia and Strobe. The effects work the
same in playback as they did in recording. Refer to page
31 for more information.
Power Switch
PLAY
EFFECT
EFFECT ON/OFF
PLAYBACK EFFECT
Select Menu
Remote sensor
PLAY (
4
) Button
RM-V712U
(provided)
To Next Page
Loading...
Need help?
General
