JVC GR-DVF10U - Programme Ae with Special Effects

30 EN
FOCUS
EXPOSURE AUTO
OFF
OFF
AUTO
AUTO
W. BALANCE
4
FADER
/ WIPE
P. AE
/ EFFECT
RETURN
PAUSE
P. AE / EFFECT
SLOW 4X
1
SLOW 10X
2
B / W
STROBE
TWILIGHT
SEPIA
MONOTONE
CLASSIC FILM
SEL.
4
Programme AE With Special Effects
IMPORTANT:
If certain Fades or Wipes ( Z pg. 29) are activated, some
modes of Programme AE with special effects cannot be
used. If you select a mode that is unusable in the current
situation, the mode's symbol blinks.
You can choose any one of the effects from the P.AE/
EFFECT Menu.
1
SELECT OPERATION MODE
Set the Power Switch to “PRO.”.
2
ACCESS MANUAL MODE ITEM MENU
Press the Select Dial and move the highlight bar to
“P.AE/EFFECT” by rotating the Select Dial.
3
ACCESS P.AE/EFFECT SELECT MENU
Press the Select Dial. The P.AE/EFFECT Menu
appears.
4
SELECT MODE
Move the highlight bar to the desired mode by
rotating the Select Dial, then press it.
•The P.AE/EFFECT Menu disappears and the selected
mode is activated. The symbol of the selected mode
appears.
5
DISABLE MODE
To turn off the selected mode, re-access the P.AE/
EFFECT Menu and move the highlight bar to “OFF”
by rotating the Select Dial. Then press it.
NOTE:
Programme AE with special effects can be changed during
recording or during Record-Standby.
Display
RECORDING Advanced Features (cont.)
Manual Mode Item
Menu
P.AE/EFFECT Menu
The indicator for the selected mode appears, and the
selected mode is engaged.
Select Dial Power Switch