JVC GR-DVF10U - Other Parts

EN65
Controls
1 Dioptre Adjustment Control ................ Z pg. 12
2 Lens Cover Open/Close Ring............... Z pg. 14
3 Video Light Switch
[LIGHT OFF/AUTO/ON] ..................... Z pg. 19
4 Snapshot Button [SNAPSHOT] ............ Z pg. 22
5 •Power Zoom Lever [T/W] ................. Z pg. 18
•Speaker Volume Control [VOL.] ....... Z pg. 38
6 Picture Stabilizer Button
[P. STABILIZER]................................... Z pg. 18
7 Fast-Forward Button [ 3 , FF] .............. Z pg. 38
8 Rewind Button [ 2 , REW] .................. Z pg. 38
9 Stop Button [5 , STOP] ........................ Z pg. 38
0 Play/Pause Button
[ 4 /6, PLAY/PAUSE]............................ Z pg. 38
! •Select Dial [+, –, PUSH] ............... Z pg. 9, 24
•Bright Dial .......................................
Z pg. 17
@ MENU/DISPLAY Button ................ Z pg. 15, 24
# Recording Start/Stop Button................. Z pg. 14
$ Power Switch ............................... Z pg. 14, 38
% Battery Release Switch
[BATTERY RELEASE] ........................... Z pg. 6
^ Monitor Open Button ......................... Z pg. 10
& OPEN/EJECT Switch ............................ Z pg. 10
Connectors
* DC IN Jack ......................................... Z pg. 7
The connectors ( to r are located beneath the
cover.
( Video Output Connector ..................... Z pg. 42
) Audio Output Connector [L] ............... Z pg. 42
q Audio Output Connector [R] ............... Z pg. 42
w External Stereo Microphone Input
Connector [MIC] ................................. Z pg. 56
e S-Video Output Connector [S OUT] .... Z pg. 42
r J Terminal
[JLIP (Joint Level Interface Protocol)
Connector] ......................................... Z pg. 51
• Connect the editing cable when performing
Random Assemble Editing (
Z pg. 50 – 55).
• It is used to connect the camcorder to a device
such as a personal computer.
For further details consult your nearest JVC
dealer.
• JLIP-controlled editing from camcorder to VCR
is not possible if the VCR is not equipped with a
J terminal.
Indicators
t Tally Lamp .......................................... Z pg. 14
y Power Lamp ....................................... Z pg. 14
Other Parts
u Battery Pack Mount ............................ Z pg. 6
i Viewfinder .......................................... Z pg. 12
o Grip Strap ........................................... Z pg. 12
p • Camera sensor
Be careful not to cover this area; a sensor
necessary for shooting is built-in here.
•Remote Sensor ................................. Z pg. 45
Q Video Light ......................................... Z pg. 19
W Stereo Microphone ............................. Z pg. 56
E Eyepiece ............................................. Z pg. 63
R Speaker .............................................. Z pg. 38
T LCD Monitor ...................................... Z pg. 17
Y Shoulder Strap Eyelets ......................... Z pg. 13
U Clock Battery Slot ............................... Z pg. 8
I Tripod Mounting Socket ...................... Z pg. 13