34 EN
FOCUS
EXPOSURE MANUAL
OFF
OFF
AUTO
AUTO
W. BALANCE
FADER
/ WIPE
P. AE
/ EFFECT
4
RETURN
EXP.
0
EXP.
6
EXP.
6
RECORDING
Advanced Features (cont.)
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override and make
the adjustment manually.
1
SELECT OPERATION MODE
Set the Power Switch to “PRO.”.
2
ACCESS MANUAL MODE ITEM MENU
Press the Select Dial. The Manual Mode Item Menu
appears.
3
ACCESS EXPOSURE CONTROL
Move the highlight bar to “EXPOSURE” by rotating
the Select Dial, then press it. Rotate the Select Dial to
display “MANUAL”, then press it. The Manual Mode
Item Menu disappears. “EXP.” and the highlight bar
on the exposure control indicator are displayed.
4
ADJUST EXPOSURE
To brighten the image . . .
.... rotate the Select Dial upward. The exposure
control indicator increases (maximum +6).
Go to step 5.
To darken the image . . .
.... rotate the Select Dial downward. The exposure
control indicator decreases (maximum –6).
Go to step 5.
5
END ADJUSTMENT OF EXPOSURE
Press the Select Dial. Exposure adjustment is complete.
The indication “EXP.” changes to “PRO.” and the
highlight bar on the exposure control indicator goes
out.
•If you want to reset the exposure, repeat step 2.
To Return To Automatic Exposure Control . . .
.... rotate the Select Dial to display “AUTO” then press it
in step 3. The exposure control indicator disappears.
Or set the Power Switch to “AUTO”.
NOTES:
●
After the Power Switch is set to “OFF”, Exposure Control
is reset to “AUTO”.
●
Manual exposure adjustment is recommended in the
following situations:
•
When shooting using reverse lighting or when the
background is too bright.
•
When shooting on a reflective natural background
such as at the beach or when skiing.
•
When the background is overly dark or the subject light.
Manual Mode Item
Menu
Exposure control indicator
Display
Power Switch
To brighten the image
To darken the image
Select Dial
To Next Page
Loading...
Need help?
General
