55
䡵 When [Manual] is selected
A
[SPOT METER FIXED] is displayed when the switch is
flipped. The brightness of the cursor position is displayed.
B [SPOT METER OFF] is displayed when the switch is
flipped. Displays of cursors and brightness disappear.
C [SPOT METER SELECT] is displayed when the switch is
flipped. The cursor blinks in red.
Move the cursor with the cross-shaped button (
JKH I) to
specify the position to display the brightness. When the
position is decided, press the Set button (R) or flip the
switch to confirm.
D Returns to the state in A.
Memo :
● When moving the cursor position, [SHUTTER]/[AE
LEVEL] control is disabled.
● You can also decide the position of the cursor with the Set
button (
R).
● When the brightness is 0 % in the entire screen, the frame
is fixed in the center.
● If the cursor is outside the A4:3B range, changing the
[Aspect Ratio] item in the [Record Format] menu from
A16:9B to A4:3B restores the cursor to the default position.
(A Page 75)
You can append OK marks to the clips for important scenes.
Clips appended with OK marks cannot be deleted, thus
protecting the important clips. In addition, you can display
only the clips with OK marks in the thumbnail display during
Media mode.
Appending OK Marks During Recording
1 Assign the AOK MarkB function to the [RET] button on
the lens from the menu.
● Select [Main Menu] B [Camera Function] B [Switch Set]
B [LENS RET] B AOK MarkB. (A Page 79)
● Append or delete the [OK] mark with every press of the
[RET] button.
● When an OK mark is appended, AOKB appears at the top
left of the status screen on the viewfinder/LCD monitor.
( A Page 102, 109)
Memo :
● Clips appended with [OK Mark] cannot be deleted from
the camera recorder using [Delete Clip]. (However, they
will be deleted when the SDHC card is formatted.)
● When the camera recorder is in Media mode (SD Card
mode), you can delete the [OK] marks appended during
recording, or append/delete [OK] marks after shooting.
( A Page 68 [Appending and Deleting OK Marks])
● When the write-protect switch on the SDHC card is set
( is displayed), [OK] marks cannot be appended/
deleted.
Cursor (Green)
Cursor
(Blinks in red)
Protecting Important
Scenes (OK Mark Function)
00:00:00:00
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>
F5.6 AE+1 9dB 1/10000
REC
100min
100min
1280x720
60p HQ
OK
B
A
282min
30/24 fps
AOKB Mark
STATUS 1 Screen
To Next Page
Loading...
