JVC GY-HM750CHU - Others Menu

89
Shooting Assist Item
* Default values are indicated in bold characters.
Item Setting Values Function
Focus Assist
ACCU-Focus
Normal
For specifying the operation when the [FOCUS ASSIST] button on the camera recorder is
pressed. (A Page 37)
ACCU-Focus : Enables the Focus Assist and ACCU-Focus (forced focus) functions. The
depth of field of the object becomes shallower to enable easier focusing. The
ACCU-Focus function switches automatically to AOffB after about 10 seconds.
Normal : Enables only the Focus Assist function. The focused area is displayed in color
to enable easier focusing. Display color can be specified with [Color].
Color Blue
Green
Red
For setting the display color of the focused area when Focus Assist is activated.
Blue : Displays the focused area in blue.
Green : Displays the focused area in green.
Red : Displays the focused area in red.
Level
High
Middle
Low
For setting the display range of the focused area when Focus Assist is activated.
High : Sets the display range wider than Middle.
Middle : Sets the display range to standard.
Low : Sets the display range narrower than Middle.
Zebra
2Patterns
1Pattern
For selecting the number of zebra patterns to be displayed.
2Patterns: Displays 2 types of zebra patterns (Zebra1 and Zebra2).
1Pattern : Displays 1 type of zebra pattern (Zebra1).
Top1
Over,
100% to 85%,
80%,
75% to 5%
(In 5 % increments)
For setting the maximum luminance level for the AZebra1B display.
Memo :
● The relation between Top1 and Bottom1 is such that Top1>Bottom1 always holds. To
maintain this relation when setting Bottom1, the Top1 value is automatically corrected.
Bottom1
100% to 75%,
70%,
65% to 0%
(In 5 % increments)
For setting the minimum luminance level for the AZebra1B display.
Memo :
● The relation between Top1 and Bottom1 is such that Top1>Bottom1 always holds. To
maintain this relation when setting Bottom1, the Top1 value is automatically corrected.
Top2
Over,
100% to 5%
(In 5 % increments)
For setting the maximum luminance level for the AZebra2B display.
Memo :
● This item cannot be selected when [Zebra] is set to A1PatternB.
● The relation between Top2 and Bottom2 is such that Top2>Bottom2 always holds. To
maintain this relation when setting Top2, the Bottom2 value is automatically corrected.
Bottom2
100% to 85%,
80%,
75% to 0%
(In 5 % increments)
For setting the minimum luminance level for the AZebra2B display.
Memo :
● This item cannot be selected when [Zebra] is set to A1PatternB.
● The relation between Top2 and Bottom2 is such that Top2>Bottom2 always holds. To
maintain this relation when setting Bottom2, the Top2 value is automatically corrected.
Peaking
Frequency
High
Middle
Low
For setting the frequency range for applying contour enhancement using the [VF PEAKING]
adjustment knob or [LCD PEAKING +/-] button.
High : Emphasizes the high frequency range.
Middle : Emphasizes the intermediate frequency range.
Low : Emphasizes the low frequency range.