57
If both the slots are loaded with recordable cards in the
factory default ([Slot Mode] is set to ASeriesB), pressing the
[REC] button starts recording only to the media in the
selected slot. When the remaining space in the selected
media runs out, recording continues by automatically
activating the media in the other slot.
If both the slots are loaded with recordable cards in the Dual
Rec mode ([Slot Mode] is set to ADualB), pressing the [REC]
button starts recording simultaneously to the media in both
the slots.
The clips recorded to the media in both the slots are
identical, and backup recording can only be performed on
this camera recorder.
( A Page 76 [Slot Mode])
Setting to Dual Rec mode
1 Set [Slot Mode] in the [Main Menu] B [Record Set]
menu to ADualB. (A Page 76)
A ADUALB display appears on the status display screen.
2 Start recording
● Load recordable media to both slots, and press the [REC]
button.
● In the Dual Rec mode, recording to the media in both slots
starts at the same time.
● Both the card slot marks turn red, and the status
indicators of both the card slots also light up in red.
3 Stop recording
● Press the [REC] button again.
● Recording to both slots stops, and both the card slot
marks turn white.
● The same clips are recorded to both cards.
Memo :
● During recording in the Dual Rec mode, both the card slot
marks light up in red.
● During recording in the Dual Rec mode to two cards with a
different amount of remaining space, if the space of one
card runs out, recording to both slots will stop
automatically. After recording stops, recording
automatically resumes for the card with remaining space.
Although the clips are separated in this case, the clips can
be seamlessly joined by arranging them on the timeline of
the editing software since they are recorded seamlessly.
● If the last clip on the cards that are loaded to the two slots
are different from each other, and the time code operating
mode is set to AREGENB, the Regen mode for the
selected card slot will be enabled in the next recording.
Dual Rec
REC
[REC] Button
[REC] Button
Slot Status Indicator
00:00:00:00
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>
F5.6 AE+1 9dB 1/10000
STBY
100min
100min
1280x720
60p HQ
OK
B
A
282min
DUAL
STATUS 1 Screen
ADUALB Display
00:00:00:00
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>
F5.6 AE+1 9dB 1/10000
REC
100min
100min
1280x720
60p HQ
OK
B
A
282min
DUAL
STATUS 1 Screen
Lit in red
00:00:00:00
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>
F5.6 AE+1 9dB 1/10000
STBY
100min
100min
1280x720
60p HQ
OK
B
A
282min
DUAL
STATUS 1 Screen
White
To Next Page
Loading...
