Connecting via the Component Connector
You can connect this unit to the component connector of a TV to play back
videos in analog high-definition quality.
0
Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
0
Turn off the camcorder by pressing the M button for about 2 seconds.
2
Connect the AC adapter to this unit.
.
3
Press the external input button on the TV to switch to the input from this
unit via the connected connector.
.
4
Play back a file.
.
“Playing Back Videos” (A p. 51)
“Playing Back Still Images” (A p. 53)
Memo :
0
Even if “DISPLAY ON TV” in the common menu is set to “ON” during video
playback, buttons (icons) and date/time will not be displayed on the
connected TV. In addition, buttons (icons) and date/time displayed on the
LCD monitor of this unit will not disappear even after 3 seconds.
“DISPLAY ON TV” (A p. 112)
0
When playing back in HD quality, set “COMPONENT OUTPUT” in the
common menu to “1080i”.
0
The video is output in standard quality if the setting remains at “576i”.
“COMPONENT OUTPUT (GZ-HM445/GZ-HM650/GZ-HM670)”
(A p. 113)
0
For questions about the TV or method of connection, contact your TV's
manufacturer.
Connecting via the AV Connector
By connecting the supplied AV cable to the AV connector, videos can be
played back on a TV.
0
Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
0
Turn off the camcorder by pressing the M button for about 2 seconds.
2
Connect the AC adapter to this unit.
.
3
Press the external input button on the TV to switch to the input from this
unit via the connected connector.
.
4
Play back a file.
.
“Playing Back Videos” (A p. 51)
“Playing Back Still Images” (A p. 53)
Memo :
0
For questions about the TV or method of connection, contact your TV's
manufacturer.
Playback
57
To Next Page
Loading...
Need help?
General