Grip Adjustment
.
A Pull back the pad
B Adjust the length of the belt
C Attach the pad
Caution :
0
Be sure to fasten the grip belt properly.
If the belt is loose, this unit may drop and result in injuries or damages.
Inserting an SD Card
When a commercially available SD card is inserted, recordings can still be
made to the card without stopping when the remaining recording time on the
built-in memory runs out.
“Types of Usable SD Card” (A p. 17)
“Using an Eye-Fi Card” (A p. 18)
“Approximate Video Recording Time” (A p. 73)
1
Close the LCD monitor.
.
2
Open the cover.
.
3
Insert an SD card.
.
0
Insert with the terminal side facing outward.
Warning
0
Make sure not to insert the card in the wrong direction.
It may cause damage to the unit and card.
0
Turn off the power of this unit before inserting or removing a card.
0
Do not touch the metal contact area when inserting the card.
Memo :
0
When “SEAMLESS RECORDING” is set to “ON”, recordings can still be
made to the SD card without stopping when the remaining recording time
on the built-in memory runs out.
0
Both videos and still images can be recorded on one SD card. It is
recommended to confirm the video operation of the SD card before usage.
“SEAMLESS RECORDING” (A p. 130)
0
To record to the card, it is necessary to perform media settings.
When no card is available, set media settings to “BUILT-IN MEMORY” for
recording.
“REC MEDIA FOR VIDEO” (A p. 145)
“REC MEDIA FOR IMAGE” (A p. 145)
0
To use cards that have been used on other devices, it is necessary to
format (initialize) the card using “FORMAT SD CARD” from media
settings.
“FORMAT SD CARD” (A p. 155)
Getting Started
16
To Next Page
Loading...
Need help?
General