Preparing a DVD Writer (CU-VD50U)
1
Connect the USB cable and the AC adapter.
0
Turn off the camcorder by pressing the M button for about 2 seconds.
.
* The AC adapter shown in the illustration is AC-V11U.
A Connect the USB cable provided with the DVD writer.
B Connect the AC adapter of the DVD writer.
C Connect the AC adapter to this unit.
0
This unit powers on automatically when the AC adapter is connected.
0
This unit turns on and the “BACK-UP” menu appears.
0
While the USB cable is connected, the “BACK-UP” menu is
displayed.
0
Refer also to the instruction manual of the DVD writer.
2
Turn on the DVD writer and insert a new disc.
.
A Press the power button to turn on the power.
B Press the eject button to open the disc tray.
C Pull out the tray completely and load a new disc properly.
D Push the disc tray in until it clicks into place.
Caution :
0
Be sure to turn off the power when connecting the devices.
Otherwise, electric shocks or malfunctions may occur.
Memo :
0
All buttons on the DVD writer CU-VD50U, other than the power and eject
buttons, will not work when connected to this unit.
Creating a Disc
1
Prepare a DVD writer.
0
Insert a new disc into the DVD writer.
“Preparing a DVD Writer (CU-VD3U)” (A p. 93)
“Preparing a DVD Writer (CU-VD50U)” (A p. 94)
2
Copy files to the disc with the following methods.
“Copying All Files” (A p. 95)
“Copying Files by Date” (A p. 96)
“Copying Selected Files” (A p. 97)
Copying
94
To Next Page
Loading...
Need help?
General