Capturing a Still Image in the Video during
Playback
You can capture still images of the scenes you like in the recorded videos.
1
Select video mode.
.
2
Tap q to select the playback mode.
.
3
Tap on the desired video.
.
4
Tap pause e at the desired scene during playback.
.
0
After pausing the video, you can fine-tune the point to capture by
tapping forward slow-motion k and reverse slow-motion l.
5
Capture a still image.
.
Memo :
0
Still images are captured with a size of 1920×1080.
0
Captured still images are stored in the media where the video is being
played back from.
Combining Videos Recorded by Seamless
Recording
Videos that are recorded on two separate media and with “SEAMLESS
RECORDING” in the video recording menu enabled can be combined into
a single video.
“SEAMLESS RECORDING” (A p. 130)
1
Select video mode.
.
2
Tap q to select the playback mode.
.
3
Tap “MENU”.
.
4
Tap “SEAMLESS REC CTRL”.
.
5
Tap “COMBINE SCENES”.
.
0
This unit starts a search to detect seamless videos.
Combining cannot be performed if no seamless videos are found.
6
Tap “YES”.
Editing
88
To Next Page
Loading...
Need help?
General