displayed every 30 minutes. To turn off the message display, set “3D
DISPLAY WARNING” to “OFF”. (for GZ-HM960)
“3D DISPLAY WARNING (for GZ-HM960)” (A p. 150)
0
If the left and right images of an object close to the camera do not appear
to be in alignment, or the 3D effect of a distant object is weak, you can
change the way they appear to the eye by adjusting the parallax. (for GZ-
HM960)
“3D LEVEL ADJUST (for GZ-HM960)” (A p. 148)
Playing Back 3D Images (for GZ-HM960)
If you are using a 3D compatible TV, you can play back 3D images by
connecting to the HDMI connector.
0
Use a High Speed HDMI mini cable as the HDMI mini cable when not using
the provided one.
0
Refer also to the instruction manual of the TV in use.
1
Connect to a TV.
.
0
Turn off the camcorder by pressing the M button for about 2 seconds.
2
Connect the AC adapter to this unit.
.
3
Press the external input button on the TV to switch to the input from this
unit via the connected connector.
.
4
Play back a file.
.
“Playing Back Videos” (A p. 74)
“Playing Back Still Images” (A p. 77)
Playback
80
To Next Page
Loading...
Need help?
General