Masterpage:Right-FullCol
EN 37
Filename [HM-100U_Eng_05Index.fm]
Basic Recording
Features
A Changing display information
Press [DISPLAY].
Each time you press the button, the front display panel
shows the clock time, remaining time and the time
counter in sequence.
•The remain [r] indicator will be displayed when the
front display panel shows the remaining time.
•To display the VCR status including the time counter,
the channel number and the clock time on the TV
screen, see ‘Showing on-screen display’ (A page 38).
B Specifying recording length
— Instant Timer Recording (ITR)
You can easily specify the recording length from 30
minutes to 8 hours and the VCR shuts off after recording
is finished.
During recording, press [REC (R)] on the front panel
repeatedly until the recording length you want appears
on the front display panel.
The record [X] indicator starts flashing.
Each time you press the button, recording length
increases in 30-minute intervals (up to 8 hours).
To cancel an ITR, press [STOP (L)] on the Remote or on
the front panel.
•Turn on the VCR and the TV, and select the AV
mode on the TV.
•Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
IN F–1
B
B
A
VCR
TV
CABLE
/DBS
Time Counter
Remaining Time
Clock Time
HM-DH100U_Eng.book Page 37 Thursday, August 5, 2004 1:54 PM
To Next Page
Loading...
Need help?
General
