JVC HR-XVS20E - Page 10

10 EN
INDEX (cont.)
ON-SCREEN DISPLAY (S-VHS deck)
When “O.S.D.” is set to “ON” (
墌
pg. 72), various operational indicators appear on the TV screen.
For On-screen display for DVD deck, refer to “Checking the DVD function status” (
墌
pg. 44).
A
Operation Mode Indicators
B
Tape Speed (SP/LP/EP)
C
Tape Direction
D
Index Mark Indicator (MARK)
墌
pg. 26
E
Counter Display
F
Tape Remaining Time Indicator
墌
pg. 28
G
Audio Mode Display
墌
pg. 25
H
Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press 3 or
5 from the Stop mode or
perform an Index Search.
(
墌 pg. 24) The position of
“q” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
I
VPS/PDC Indicator
墌
pg. 31, 33
J
Type of Broadcast
墌
pg. 28
K
Current Day/Month/Year
L
Clock Display
M
Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1, S-1 or
SAT*)
* When “L-2 SELECT” is set to “SAT” (墌 pg. 61), “SAT” appears
instead of “L-2”.
N
S-VHS ET Indicator
(S-VHS ET : ON/S-VHS ET : OFF)
墌
pg. 71
O
“Cassette Loaded” Mark
Beginning End