JVC KD-DV8306 - Setting the Time for Dimmer

ENGLISH
38
Setting the time for dimmer
• When appears on the display, you can move
back to the previous display by pressing number
button 3.
1 Follow steps 1 to 3 on page 35.
• In step 2, select “DISPLAY.”
• In step 3, select “Dimmer.”
2 Select “Time Set.”
3 Adjust the dimmer time.
1 Turn the control dial to set the dimmer time.
2 Press ¢ to select “To.” Then, turn the
control dial to set the dimmer end time.
4 Exit from the setting.
Changing the display color
You can select your favorite display color for each
source (or all sources).
• When appears on the display, you can move
back to the previous display by pressing number
button 3.
Setting the display color
1 Follow steps 1 to 3 on page 35.
• In step 2, select “COLOR.”
• In step 3, select “Color Sel.”
2
3 Select a source.
All Source *
1
Ô DISC Ô Changer *
3
(or
Ext In *
2
) Ô Line In Ô USB Ô FM Ô
AM Ô iPod *
3
/D.PLAYER *
3
Ô (back to the
beginning)
*
1
When you select “All Source,” you can use the
same color for all the sources.
*
2
Depends on the “Ext Input” setting, see page 37.
*
3
Displayed only when the target component is
connected.
4 Select a color.
Every *
4
Ô Aqua Ô Sky Ô Sea Ô Leaves
Ô Grass Ô Apple Ô Rose Ô Amber Ô
Honey Ô Violet Ô Grape Ô Pale Ô
User *
5
Ô (back to the beginning)
*
4
The color changes every 2 seconds.
*
5
The user-edited colors—“Day Color” and
“NightColor” will be applied (see page 39 for
details).
5 Repeat steps 3 and 4 to select the color
for each source (except when selecting
“All Source” in step 3).
6 Exit from the setting.
EN38-43_DV8306_001A_3.indd 38EN38-43_DV8306_001A_3.indd 38 4/18/07 4:50:41 PM4/18/07 4:50:41 PM