42
(Pre
ss KEY_GREEN twice
for
recorder)
2.
In Timer menu, user can increase、delete preengage programs; In Timer Edit menu, user could set、modify
preengaged programs’ information;
In Timer menu: press KEY_YELLOW to get into Timer Edit menu to add a timer .Then set timer’s information
in Timer Edit menu.
Flow of setting a timer’s information:
a)
Type: Set program type :DTV
or RADIO;
b)
Mode: Way of triggering a timer(once/daily/weekly/monthly);
c)
Recorder:“ON”: preengage for watching and recording(record). “OFF”: preengage only for
watching(reminder);
d)
Set the date/time and Duration time (exact to minutes);Must be reasonable (behind current time);
e)
Timer: when there are some conflicts a warning message will pop up;
f)
Press KEY_MENU to return to Timer menu and store the timer’s information.
(T
imer Edit menu )
3.
When the timer recorder is timeout, it jumps to the very channel and starts to record the program
automatically.(if a manual recording is under process, it will stop the manual recording process and starts the
timer recorder automatically);When there is left 10s before recorder , a prompted window will pops
up;