JVC LT-42WX70 - Tint Setting

16
Tint
Adjusts the tone of color.
■ –30 – +30 (Skin color reddish ↔ Skin color greenish)
Tint Setting
Adjusts the tone of color in detail.
● The setting is fixed to 0 and unadjustable when “ Color Space ” is set to “ sRGB ”,
“ AdobeRGB ”, or “ x.v.Color ”.
● The setting is fixed to 0 and unadjustable when “ Color Space ” is set to “ Auto ”
and the xvYCC signal is input to the HDMI terminal.
● The setting is fixed to 0 and unadjustable when “ PC Monitor Mode ” is set to
“ On ”.
◆ BY Gain
Adjusts the amplitude of the B-Y color difference signal. You can modify
the total coloring of the picture.
■ –30 – +30 (Small amplitude ↔ Large amplitude)
◆ BY/RY Angle
Adjusts the demodulation angle between the B-Y color difference signal
and the R-Y color difference signal. You can modify the total coloring of
the picture.
■ –15 – +15 (Decreasing the angle ↔ Increasing the angle)
Color
Adjusts the density of color.
■ –30 – +30 (Dilute ↔ Dense)
WX70instus.indb16WX70instus.indb16 09.3.65:14:47PM09.3.65:14:47PM