JVC LT-42WX70 - Auto Setting; Input Label

33
Changing the settings : Setup
Input Label
Adds a source name specifying a device after the source name (“Input-1” -
“Input-4”).
■ (No label) / VCR / DVD / Blu-ray Disc / PVR / D-VHS / STB / SAT /
AMP / GAME / CAM / DISC / PC
4:3 Aspect Setting
Selects the aspect setting which is applied when “ Zoom ” (➔ page 30) is
set to “ Auto ”. The picture is displayed in the selected aspect when the
aspect is 4:3 or when the monitor cannot detect the aspect of a picture.
■ Regular : Displays the picture in “ Regular ”.
■ Panoramic : Displays the picture in “ Panoramic ”.
1080 Auto Setting
Selects the default aspect for 1080i/p signals.
■ Full : Expands the picture to the full display size.
■ Full Native : Displays the picture in the same magnification (100%
scan).
Input-4 Setting
Selects the signal type for the INPUT-4 terminal (D-sub 15 pin).
● Use the supplied conversion cables and other cords according to the type of
connection. (➔ page 08)
■ PC : For PC signals
■ Component : For component signals
■ Composite : For composite signals
WX70insteu.indb33WX70insteu.indb33 09.3.911:10:27AM09.3.911:10:27AM