EasyManua.ls Logo

JVC LT-42WX70 - Color Space

JVC LT-42WX70
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Color Matrix
Selects the color matrix used for color conversion.
The setting is fixed to “ Auto ” and unadjustable when “ Color Space ” is set to
“ sRGB ”, “ AdobeRGB ”, or “ x.v.Color ”.
The setting is fixed to “ Auto ” and unadjustable when ” PC Monitor Mode ” is
set to “ On ”.
The setting is fixed to “ Auto ” and unadjustable when “ Color Space ” is set to
Auto ” and the xvYCC signal is input to the HDMI terminal.
Auto : An appropriate color matrix is applied automatically.
709 : The color matrix conforming ITU-R BT.709 is used for conversion.
601 : The color matrix conforming ITU-R BT.601 is used for conversion.
Color Space
Changes the range of color representation.
sRGB ” or “ AdobeRGB ” is selectable when “ PC Monitor Mode ” is set to “ On ”.
Even when “ Auto ” is selected, the setting may not switch to “ x.v.Color
automatically depending on the connected device or the connection status.
Auto : Normally applies “ Wide ”. When the xvYCC signal is input to the
HDMI terminal, “ x.v.Color ” is applied automatically.
Normal : HDTV standard.
Wide : The wide color gamut of the equipped LED panel. (Wider than
the HDTV standard.)
x.v.Color : Color representation suitable for x.v.Color.
sRGB : Color representation suitable for sRGB.
AdobeRGB : Color representation suitable for AdobeRGB.
WX70instus.indb20WX70instus.indb20 09.3.65:14:47PM09.3.65:14:47PM

Table of Contents

Other manuals for JVC LT-42WX70

Related product manuals