19
Changing the settings : Picture
Backlight Setting
Adjusts settings of functions relating with backlight.
◆ Smart Picture
Reduces the backlight automatically in dazzling scenes.
■ On / Off
◆ Dynamic Backlight
Reduces the backlight automatically in dark scenes to represent black
deeper.
■ High / Medium / Low / Off
Color System
Selects the color system for the picture signal which is input to INPUT-4
from composite terminal.
● The setting is adjustable only when “ Input-4 Setting ” is set to “ Composite ”.
(➔ page 33)
● The setting is unadjustable when “ PC Monitor Mode ” is set to “ On ”.
■ Auto : An appropriate color system is automatically applied
depending on the type of the input signal. Normally select this.
■ PAL/50 : When the color system is PAL.
■ PAL/60 : When the color system is PAL 60.
■ SECAM : When the color system is SECAM.
■ NTSC3.58 : When the color system is NTSC 3.58.
■ NTSC4.43 : When the color system is NTSC 4.43.
■ PAL M : When the color system is PAL-M.
■ PAL N : When the color system is PAL-N.
WX70instus.indb19WX70instus.indb19 09.3.65:14:47PM09.3.65:14:47PM
To Next Page
Loading...
Need help?
General
