JVC LT-42WX70 - Colour System; Dynamic Backlight; Smart Picture

19
Changing the settings : Picture
Backlight Setting
Adjusts settings of functions relating with backlight.
◆ Smart Picture
Reduces the backlight automatically in dazzling scenes.
■ On / Off
◆ Dynamic Backlight
Reduces the backlight automatically in dark scenes to represent black
deeper.
■ High / Medium / Low / Off
Colour System
Selects the colour system for the picture signal which is input to INPUT-4
from composite terminal.
● The setting is adjustable only when “ Input-4 Setting ” is set to “ Composite ”.
(➔ page 33)
● The setting is unadjustable when “ PC Monitor Mode ” is set to “ On ”.
■ Auto : An appropriate colour system is automatically applied
depending on the type of the input signal. Normally select this.
■ PAL/50 : When the colour system is PAL.
■ PAL/60 : When the colour system is PAL 60.
■ SECAM : When the colour system is SECAM.
■ NTSC3.58 : When the colour system is NTSC 3.58.
■ NTSC4.43 : When the colour system is NTSC 4.43.
■ PAL M : When the colour system is PAL-M.
■ PAL N : When the colour system is PAL-N.
WX70insteu.indb19WX70insteu.indb19 09.3.911:10:26AM09.3.911:10:26AM