JVC LT-42WX70 - Page 170

16
Hue
Adjusts the tone of colour.
■ –30 – +30 (Skin colour reddish ↔ Skin colour greenish)
Hue Setting
Adjusts the tone of colour in detail.
● The setting is fixed to 0 and unadjustable when “ Colour Space ” is set to
“ sRGB ”, “ AdobeRGB ”, or “ x.v.Colour ”.
● The setting is fixed to 0 and unadjustable when “ Colour Space ” is set to
“
Auto ” and the xvYCC signal is input to the HDMI terminal.
● The setting is fixed to 0 and unadjustable when “ PC Monitor Mode ” is set to
“ On ”.
◆ BY Gain
Adjusts the amplitude of the B-Y colour difference signal. You can
modify the total colouring of the picture.
■ –30 – +30 (Small amplitude ↔ Large amplitude)
◆ BY/RY Angle
Adjusts the demodulation angle between the B-Y colour difference
signal and the R-Y colour difference signal. You can modify the total
colouring of the picture.
■ –15 – +15 (Decreasing the angle ↔ Increasing the angle)
Colour
Adjusts the density of colour.
■ –30 – +30 (Dilute ↔ Dense)
WX70instasia.indb16WX70instasia.indb16 09.3.33:24:11PM09.3.33:24:11PM