vii
Warning
Ventilation openings
Use a vacuum cleaner to get rid of the dust on and around the intakes (all
the openings). If a vacuum cleaner is not available, use a cloth and wipe it
off. Leaving the dust around the intakes may prevent proper temperature
control and cause damage to the product.
Keep space around the product as illustrated below at minimum for proper
ventilation.
To prevent an accidental fall
When hanging on a wall
When attaching the monitor onto a wall, use the optional wall mounting
unit.
Consult qualified installers for installation.
When fixing to furniture
1 Thread a belt (not supplied) through the hole on the
back of the stand.
2 Fix the belt to the furniture using a screw.
50 mm
50 mm
150 mm 150 mm
200 mm 200 mm
WX70insteu.indbviiWX70insteu.indbvii 09.3.911:10:12AM09.3.911:10:12AM
To Next Page
Loading...
Need help?
General
