1-34 (No.MB191)
4. Micon version check
You can confirm Micon version and destination.
Insert the power cord in an outlet.
Press the SET UP, "4" and DIMMER
buttons on the remote controller.
System micon version is indicated on
the FL display.
Model number is indicated
on the FL display.
Destination is indicated on the FL display.
Press the SET UP, "4" and DIMMER
buttons on the remote controller.
DVD backend firmware version is indicated
on the FL display.
Press the SET UP, "4" and DIMMER
buttons on the remote controller.
Press the SET UP, "4" and DIMMER
buttons on the remote controller.
5. DVD region check
You can confirm DVD region number.
Press the
STANDBY/ON
and DVD LEVEL
buttons on the main unit at standby.
FL indication
REGION
(Example) "2U ver.0097 MX-JD3 / FMU-DE2-1"
DVD region number is indicated on the on screen display.
DVD destination
Firmware version
Firmware model
DVD unit numbe
To Next Page
Loading...
Need help?
General
