JVC RX-5022VSL

CD changer
After pressing CD-DISC, you can use the following buttons for CD
changer operations:
Cassette deck
After pressing TAPE/CDR, you can use the following buttons for
cassette deck operations:
I-4-4 : Return to the beginning of the current
(or previous) track.
• : Stop playback.
1 - 6, 7/P
:Select the number of a disc installed in a CD
changer.
If your CD changer is of 200-disc loading capability (except for
XL-MC100 and XL-MC301),
you can do the following operations using the number buttons after
pressing CD:
I Select a disc number.
2 Then select a track number (always enter two digits).
3 Start playback.
Examples:
• Selecting disc number 3, track number 2, and start playback.
Press 3, then, 0, 2, then _.
• Selecting disc number 10, track number 5, and start playback.
Press 1, 0, then, 0, 5, then I_.
• Selecting disc number 105, track number 12, and start playback.
Press 1, 0, 5, then 1, 2, then _.
FF : Fast wind the tape from left to right.
• : Stop playback or recording.
REC PAUSE
: Press this button to enter recording pause.
Press this button then I_ to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 8.
CD recorder
After pressing TAPE/CDR, you can use the following buttons for
CD recorder operations:
I-4-4 : Return to the beginning of the current
(or previous) track.
• : Stop playback or recording.
REC PAUSE : Press this button to enter recording pause.
Press this button then _ to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 8.
26