_j |vJ'_L"_"__*']':'J'_'l,,'STfl':'J'fl,_
IMPORTANT:
To operate JVC's video components using this remote control:
• Some JVC's VCRs can accept two types of the control signals--
remote code "A" and "B." Before using this remote control, make
sure that the remote control code of the VCR connected to the VCR
jacks is set to code "A."
• Aim the remote control directly at the remote sensor on each
component, not on the receiver.
VCR
You can always perform the following operations:
VCR OH +/- : Change the TV channels on the VCR.
DVD menu operations
After pressing DVD (source selecting button),
you can use the following buttons for DVD
menu operations:
MENU
v/))_)
fNTfR -" 11ilii 'ooi { ii+
@ ,lii) _W'_;
i11 )u[il }L4
A/V/I_/.,,4 : Select an item on the menu screen.
T_
Before operating, set TV/CATV selector to TV.
You can always perform the following operations:
m
O
¢D
ge
lgS
o
_e
L
¢D
o
o
=l
"u
o
==
After pressing VCR (source selecting button), you can use the
following buttons for VCR operations:
FF : Fast wind a tape.
• : Stop playback or recording.
REC PAUSE : Press this button to enter recording pause.
Press this button then _ to start recording.
TV/VIDEO :Change the input mode (TV tuner and video
input).
TV/CATV OH +/- :Change the channels.
After pressing TV SOUND (source selecting button), you can use
the following buttons for TV operations:
RETURN (10) : Function as the RETURN button.
DVDplayer
You can always perform the following operations:
After pressing DVD (source selecting button), you can use the
following buttons for DVD operations:
: Return to the beginning of the current
(or previous) track.
• : Stop playback.
27
To Next Page
Loading...
Need help?
General
