JVC RX-5022VSL

Amplifier
Output Power
At Stereo operation:
Front channels: 100 W per channel, rain. RMS, driven into 8 n,
40 Hz to 20 kHz with no more than 0.8% total
harmonic distortion.
At Surround operation:
Front channels: 100 W per channel, min. RMS, driven into 8 _ at 1 kHz with no
more than 0.8% total harmonic distortion.
Center channel: 100 W, min. RMS, driven into 8 _ at 1 kHz, with no more than
0.8% total harmonic distortion.
Rear channels: 100 W per channel, min. RMS, driven into 8 _ at 1 kHz, with no
more than 0.8% total harmonic distortion.
m
o
€0
o
o
=.
-o
€o
m
o
s
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
Frequency Response (8 _):
Tone Control:
CD, TAPE/CDR, TV SOUND, VCR, DVD:
220 mV/47 k
Coaxial: DIGITAL 1 (DVD): 0.5 V (p-p)/75
Optical: DIGITAL 2 (CD): -21 dBm to -15 dBm (660 nm -+30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency -- 32 kHz, 44.1 kHz, 48 kHz).
TAPE/CDR, VCR: 220 mV
CD, TAPE/CDR, TV SOUND, VCR, DVD: 87 dB/78 dB
CD, TAPE/CDR, TV SOUND, VCR, DVD: 20 Hz to 20 kHz (-+1 dB)
Bass (100 Hz): -+10 dB
Treble (10 kHz): -+10 dB
Video
Video Input Sensitivity/Impedance:
Composite video:
Video Output Level/Impedance:
Composite video:
Synchronization:
Signal-to-Noise Ratio:
VCR, DVD:
VCR, MONITOR OUT:
Negative
45 dB
1 V (p-p)/75
1 V (p-p)/75
31