JVC RX-5060BJ - Page 11

(No.MB504)1-11
3.1.6 Removing the power transformer and regulator board
(See Fig. 11 and 12)
(1) Remove the four screws U attaching the power transform-
er.
(2) Remove the one screw V attaching the fuse board.
(3) Remove the three screws W and one screw X attaching the
regulator board.
(4) Disconnect the wire from CN101
of headphone board.
Fig.11
Fig.12
3.1.7 Removing the headphone board
(See Fig. 13)
(1) Remove the nut Y attaching the head phone board.
Fig.13
V
U
U
Fuse board
Power trans
CN101
W
WX
Regulator board
Headphone jack
Y